Assembly - LOGICDATA COSMO SYDNEY Original Instructions Manual

4. ASSEMBLY

TOOLS AND EQUIPMENT
The Adjustable Bed Frame should be assembled by two adults. If you assemble the Bed Frame alone, be careful
when lifting heavy parts. Ensure the assembly area is larger than the Bed Frame. Follow the steps carefully
to assemble the Bed Frame correctly.
UNPACKAGING
Lay the packaging flat on the ground, ensuring it is the right way up (see notices on the packaging). Carefully
open the packaging and check its contents, as described in Chapter 3, "Box Contents".
WARNING
Moderate risk of death or serious injury to children, people who are under physical / mental restrictions
or limited perception, and animals
The plastic packaging of the Bed Frame is a potential suffocation hazard. Leaving children or animals unsupervised
with the empty packaging may lead to death through suffocation.
▪ Do not leave children or animals unsupervised.
▪ Dispose of unnecessary packaging immediately.
NOTICE
Ensure all parts are at room temperature. Parts that are too cold or hot may affect assembly.
NOTICE
Do not use a knife or a sharp object to unpackage the Bed Frame. This may damage the product.
NOTICE
Placing the parts directly onto a hard floor may cause damage to the floor or the parts themselves.
▪ Use the cardboard packaging material to cushion the impact and avoid damage.
CAUTION
Risk of minor or moderate injury through cutting
Contact with sharp edges may lead to minor or moderate injury through cutting.
▪ Avoid contact with sharp edges.
▪ Do not connect the product to power supply during assembly.
12 // COSMO SYDNEY ADJUSTABLE BED FRAME – ORIGINAL INSTRUCTIONS