LOGICDATA COSMO SYDNEY Original Instructions Manual page 14

STEP 3: CONNECTING THE BARS
CAUTION
Risk of minor or moderate injury through crushing
The Side Rails are not secured while they are standing alone. If they fall over, this may lead to minor or moderate
injury through crushing.
▪ Do not attempt to stand the Side Rails upright before they are connected to the Crossbars.
▪ Be careful not to knock over the Side Rails.
▪ Ensure that you are wearing suitable footwear while assembling the Bed Frame.
CAUTION
Risk of minor or moderate injury through crushing
Gripping the Side Rails' moving parts may lead to minor or moderate injury through crushing.
▪ Do not touch moving parts when lifting or moving the Side Rails. Only grip the fixed parts.
14 // COSMO SYDNEY ADJUSTABLE BED FRAME – ORIGINAL INSTRUCTIONS
TOP
SIDE
D
A
E
D
1. Lift the first Crossbar (D) and
place one end of it into a slot on
the Side Rail (Right) (A).
Ensure the Thread on the Side
Rail (the metal part facing
upwards) passes through the
hole at the end of the Crossbar.
D
TOP
SIDE
2. Place a Crossbar Knob (E) onto
the thread connecting the Side
Rail and the Crossbar. Turn the
Knob counter-clockwise until it
is hand tight.
3. Repeat steps 1 and 2 for the
second Crossbar.
REMOVE STRAPPING TAPE
REMOVE PROTECTIVE MATERIAL