LOGICDATA COSMO SYDNEY Original Instructions Manual page 18

STEP 8: CONNECTING THE POWER CABLE
1
NOTICE
Stretching the Power Cable may damage it. This may lead to malfunctions with the Bed Frame.
NOTICE
Ensure the Cable is plugged into the mains properly. Bad connections can damage the system.
NOTICE
If the Bed Frame is too close to the wall (or touching it), it may collide during movement. To avoid damage to
the Bed Frame and it's surroundings, ensure a distance of min. 25 mm (1") is kept.
STEP 9: INSERTING THE BATTERIES
NOTICE
Replace the batteries in the Remote Control once a year. Do not use rechargeable batteries.
18 // COSMO SYDNEY ADJUSTABLE BED FRAME – ORIGINAL INSTRUCTIONS
2
1. Connect the Power Cable (J)
from the Control Box to the cable
of the Power Converter (K).
2. Connect the main power cable
to the Power Converter then to
the main.
3. Lay the main power cable along
the wall behind the Bed Frame
to minimize the risk of tripping.
Insert two 1,5V AAA batteries into
the Remote Control and slide the
cover into position. The batteries are
provided for you.