The recommended maximum load on the Bed Frame is 315 kg (700 lbs) (including the mattress). Weight must
be distributed evenly. No individual Platform is designed to support or lift this weight. Users should get in and out
of bed only when the Bed Frame is in a flat (horizontal) position. Do not place your entire weight on the head or
foot section, especially if the Bed Frame is in an elevated position. Do not stand on the Bed Frame or Platforms
at any time. Exceeding the recommended maximum load could damage the product and void the warranty.
Usage outside of the intended use described in these Original Instructions is only allowed with written consent
by LOGICDATA. Improper operation or usage outside of the intended use can result in personal injury and
damage to the system. Liability and warranty claims are void in cases of usage outside of the intended use.
REASONABLY FORESEEABLE MISUSE
Reasonably foreseeable misuse with the Adjustable Bed Frame includes, but is not limited to:
▪ Using the Bed Frame as a climbing aid
▪ Jumping on the Bed Frame
▪ Allowing children or animals to climb on or under the Bed Frame
▪ Using the Bed Frame without a mattress or with a water-based mattress
▪ Overloading the Bed Frame (max. load is 315 kg (700 lbs) evenly distributed)
▪ Continuous use of the Bed Frame (see below)
NOTICE
The Bed Frame is not designed for continuous operation. If the motors are overworked, the Bed Frame will
time-out automatically for several minutes. During this time, you will not be able to operate the Bed Frame.
Continued excessive use of the Bed Frame can damage the product.
▪ Do not operate the Bed Frame continuously.
▪ If the time-out is reached, do not operate the Bed Frame for at least 6 minutes. This will reset the time-out.
TARGET AUDIENCE
This Manual is addressed to all adults responsible for assembling the Bed Frame, who:
▪ Have (at least) basic technical knowledge
▪ Are physically able to lift the components
▪ Have fully read and understood these Original Instructions
04 // COSMO SYDNEY ADJUSTABLE BED FRAME – ORIGINAL INSTRUCTIONS
Need help?
Do you have a question about the COSMO SYDNEY and is the answer not in the manual?