Selecting The Default Screen (Optional) - Kyocera KM-5050 Operation Manual

Selecting the Default Screen (Optional)

OPERATION GUIDE
Select the default screen (on the touch panel) to appear following the
opening screen after power-on. The default screen is selectable from
among the following.
Default
screen
Copy
Send
Status
Document Box
Program
1
Press the System Menu key.
2
Press [Common Settings] and then [Change] of Default Screen.
3
Select the desired
default screen.
4
Press [OK].
5
When exiting, press [Close] repeatedly to return to the System Menu
screen.
Screen appearing immediately after power-on.
Default screen for copying (screen to appear when
the Copy key is pressed)
Default screen for sending (screen to appear when
the Send key is pressed)
Default screen for status/job cancel (screen to appear
when the Status/Job Cancel key is pressed)
Default screen for Document Box (screen to appear
when the Document Box key is pressed)
Default screen for program (screen to appear when
the Program key is pressed)
Common Settings - Default Screen
Set the default screen to be displayed when main power switch is turned on.
English
Copy Send
Status
Preparation before Use
Status Document Box Program
Cancel OK
10/5/2006 10:10
2-31