Kyocera KM-5050 Operation Manual page 156

Optional Equipment
Clearing Staple Jams
4-8
1
Pull out the staple holder referring to steps 1 and 2 of Adding Staples.
2
Holding the knob A on the face
plate of the staple holder, lift
the face plate.
3
Clear the staple jammed in the
cartridge end (staple-loaded
side).
4
Lower the face plate of the
staple holder.
5
Insert the face plate back in place. When fully inserted, the face plate locks
with a clicking sound.
6
After lifting the staple unit slightly, lower it and insert it again into its place.
7
Close the stapler front cover.
A
OPERATION GUIDE