Kyocera KM-5050 Operation Manual page 52

Preparation before Use
Item
SMTP Protocol
SMTP Port Number
SMTP Server Name
SMTP Server Timeout
Authentication
Protocol
Authenticate as
Login User Name
Login Password
POP before SMTP
Timeout
Test
E-mail Size Limit
2-16
2
Enter the correct settings in each field.
The settings to be specified in the SMTP settings screen are shown below.
Enables or disables SMTP protocol. To use E-mail, this protocol must be
enabled.
Set the SMTP Port Number or use the SMTP default port 25.
Enter the SMTP server IP address or its name. The maximum length of the
SMTP server name and IP address is 62 characters. If entering the name, a DNS
server address must also be configured. The DNS server address may be
entered on the TCP/IP General tab.
Enter the default time out for the server in seconds.
Enables or disables the SMTP authentication protocol or sets POP before SMTP
as the protocol. The SMTP authentication supports Microsoft Exchange 2000.
Authentication can be set from three POP3 accounts or you can choose a
different account.
When Other is selected for Authenticate, the login user name set here will be
used for SMTP authentication. The maximum length of the login user name is 62
characters.
When Other is selected for Authenticate, the password set here will be used for
authentication. The maximum length of the login password is 62 characters.
Enter the timeout (in seconds) if you chose POP before SMTP as the
Authentication Protocol.
This will test if the SMTP connection can be successfully established.
Enter the maximum size of E-mail that can be sent in kilobytes. When the value is
0, the limitation for E-mail size is disabled.
Description
OPERATION GUIDE