Kyocera KM-5050 Operation Manual page 110

Basic Operation
3-24
4
Enter destination E-
mail address and
press [OK].
5
Press [To:], [Cc:] or [Bcc:] to change the recipient status as necessary.
To specify another destination, go to the step 6. To specify only one
destination, go to step 7.
6
Press [Next Dest.] and repeat steps 4 and 5 to specify the destination. Up
to 100 E-mail addresses can be specified.
NOTE:
When [Add to Addr Book] is displayed, the destinations are
registered in the Address Book.
7
Press [OK]. The destinations are registered in the destination list.
8
Check the destination list.
Select a destination and press [Detail/Edit] to check and edit it. Refer to
steps 4 and 5 to edit the destination as necessary.
Select a destination
and press [Delete] to
remove the
destination from the
list.
9
Change the original size, scan resolution, etc. if necessary.
Ready to send.
Place original.
E-mail Address Entry
E-mail Address Entry
E-mail
Address
To:
Cc:
Add a new E-mail destination.
Press [E-mail Address], then enter
the address using the keyboard screen.
To:/Cc:/Bcc: can also be set.
Add to Addr Book Next Dest.
Status
Ready to send.
Place original.
Destination
abc@defg.com
ABC
Chain Detail/Edit Delete
001 002 003
AAA BBB CCC DDD
006 007 008
FFF GGG HHH III
Destination Quick Setup Type of Original/
Transmission
Status
Destination
Bcc:
Cancel OK
10/5/2006 10:10
Destination
Detail
Address
Book
To:
E-mail
Addr Entry
Folder Path
Entry
Recall
004 005 No.
EEE
009 010 1/10
JJJ
Color/Image Advanced
Setup
10/5/2006 10:10
OPERATION GUIDE
0
1