Ftp Settings - Kyocera KM-5050 Operation Manual

FTP Settings

Item
FTP
FTP Port Number
OPERATION GUIDE
This function converts image files scanned using this machine to the PDF,
TIFF, or JPEG format and saves them before uploading them directly to
the FTP server.
To use this function, register the information below. If you are unsure about
this information, contact your system administrator.
• Login User Name
• Login Password
• FTP Port Number (normally 21)
• FTP server IP address and host name
• FTP path (to the destination folder to be used for the saved images)
• Sharing of the FTP server save destination
The login user name and login password registered using the operation
panel are also used for FTP login. Set up and manage user accounts on
the FTP server.
This section explains the procedure for specifying the FTP settings in
COMMAND CENTER.
1
Click Scanner -> FTP.
2
Enter the correct settings in each field.
The settings to be specified in the FTP settings screen are shown below.
Switches FTP on or off.
You can enter the port number to be used by FTP.
3
Click Submit.
Description
Preparation before Use
2-19