Selecting The Default Screen - Kyocera KM-3050 Operation Manual

Selecting the Default Screen

OPERATION GUIDE
Select the default screen (on the touch panel) to appear following the
opening screen after power-on. The default screen is selectable from
among the following.
Default
screen
Copy
Send
Status
Document Box
Program
Application
Accessibility
Copy
Accessibility
Send
1
Press the System Menu key.
2
Press [Common Settings] and then [Change] of Default Screen.
Screen appearing immediately after power-on.
Default screen for copying (screen to appear when
the Copy key is pressed)
Default screen for sending (screen to appear when
the Send key is pressed)
Default screen for status/job cancel (screen to appear
when the Status/Job Cancel key is pressed)
Default screen for Document Box (screen to appear
when the Document Box key is pressed)
Default screen for program (screen to appear when
the Program key is pressed)
Default screen for application (screen to appear when
the Application key is pressed)
Default screen for Accessibility Copy (screen to
appear when the Accessibility Display key is
pressed in the Copy screen)
Default screen for Accessibility Send (screen to
appear when the Accessibility Display key is
pressed in the Send screen)
Preparation before Use
2-31