Specifications; Responding To Error Messages - Kyocera KM-5050 Operation Manual

Responding to Error Messages

Alphanumeric
Error Message
Acceptable staple
count exceeded.
Add paper in cassette
#.
Add paper in MP tray.
Add staples.
Add toner.
An error has occurred. –
Box limit exceeded.
OPERATION GUIDE
If the touch panel displays any of these messages, follow the
corresponding procedure.
Checkpoints
Is the acceptable staple
count exceeded? For
details, refer to
Specifications on page
Appendix-9,10,11.
Is the indicated cassette out
of paper?
Is the paper of the selected
size loaded in the Multi
Purpose Tray?
Has any of the built-in
finisher, center binding
finisher, document finisher
or 3,000-sheet capacity
document finisher run out of
staples?
–
–
–
Corrective Actions
Press [Continue] to print without
stapling.
Press [Cancel] to cancel the job.
Load paper.
Load the paper in the Multi Purpose
Tray which is of the size and type
indicated on the touch panel.
If the staples are depleted, the
machine will stop and the location of
staple depletion will be indicated on
the touch panel.
Leave the machine on and follow the
instruction to replace the staple case.
Press [Continue] to print without
stapling.
Press [Cancel] to cancel the job.
Replace the toner container.
Internal error has occurred.
Turn the main power switch off and
on.
If error occurs repeatedly, make a
note of the error code displayed on
the touch panel, and contact your
Service Representative.
Document box is full, and no further
storage is available; the job is
canceled. Press [End].
Repeat Copy box is full, and no
further repeat copy is available.
Press [Continue] to print without
using Repeat Copy.
Press [Cancel] to cancel the job.
Troubleshooting
Reference
Page
—
2-33
2-36
4-6
5-7
—
—
—
6-5