Kyocera KM-5050 Operation Manual page 42

Preparation before Use
Connecting Parallel/USB Cable (Optional)
2-6
Follow the steps below to connect a parallel or USB printer cable to the
machine.
1
When the machine is powered up, first press the Power key on the
operation panel. Check that the Power indicator and the memory indicator
are off. After this, turn off the main power switch.
2
If connection is established using a parallel cable, the PC to be connected
should also be powered off.
3
Connect the printer cable to the appropriate interface located on the right
side of the body.
When Connecting to Parallel Interface
Check that the indicators
are off.
OPERATION GUIDE