Kyocera Mita Ecosys FS-1800+ Operation Manual page 86

Using the Operator Panel
>Resolution
MENU
?
ENTER
ENTER
MENU
Resolution
You can set the default print resolution in four ways — 300 dpi, 600 dpi,
Fast 1200 mode, and Fine 1200 mode. The clarity of printed characters
and graphics becomes sharper in this order. Fine 1200 mode renders
optimum print quality but requires more printer memory and increase the
time it takes up to print a job.
1
Press the MENU key.
2
Press the or
Print Quality
3
Press the > key.
4
Press the or
>Resolution
Fast 1200 mode
5
Press the ENTER key. A blinking question mark (?) appears.
>Resolution
? Fast 1200 mode
6
Select Fast 1200 mode, Fine 1200 mode, 300 dpi or 600 dpi
using the or
If you want to abandon the setting procedure, press the CANCEL
key.
7
Press the ENTER key.
8
Press the MENU key. The message display returns to Ready.
key repeatedly until Print Quality > appears.
>
key repeatedly until >Resolution appears.
key.
1-74