Paper Handling - Kyocera Mita Ecosys FS-1800+ Operation Manual

Using the Operator Panel

Paper Handling

Paper Handling >
>MP Tray Mode
MENU
?
You can change the MP tray mode, the paper size and type for each paper
source, the sorter mode, the paper source, and paper destinations.
MP Tray Mode
The MP tray can be used in one of two modes: first mode or cassette mode.
The MP tray can hold approximately 100 sheets of paper (A4 size, 0.11 mm
thickness).
This menu does not appears when the option envelope feeder is installed on
the printer.
The maximum capacity for the MP tray of 100 sheets is based on A4
paper. If you use Legal size paper on the MP tray, the number of paper
you use should be considerably smaller than 100 sheets to avoid
Note
possible paper jam.
First Mode (Automatic Manual Feeding)
The printer automatically feeds any paper placed on the MP tray even if
another paper source is selected. After all paper in the MP tray is printed,
paper will be fed from the paper source originally selected. (This is the
factory default setting.)
Cassette Mode
The cassette mode provides faster printing speed than the first mode.
Approximately 100 sheets of paper can be continuously fed in this mode.
1
Press the MENU key.
2
Press the
appears.
Paper Handling >
3
Press the > key.
4
Press the
>MP Tray Mode
First
or key repeatedly until Paper Handling >
or key repeatedly until >MP Tray Mode appears.
1-88