Kyocera Mita Ecosys FS-1800+ Operation Manual page 63

KPDL (AUTO) Emulation
KPDL is the Kyocera Mita's implementation of the PostScript language.
The KPDL (AUTO) emulation enables the printer to automatically change
the emulation mode according to the data received when printing.
In addition to KPDL (AUTO) emulation, you can use the operator panel to
set another emulation mode that is used very often. The default setting is
PCL 6.
1
MENU
2
3
ENTER
4
5
ENTER
6
?
Press the MENU key.
Press the or key repeatedly until Emulation appears.
Emulation
PCL 6
Press the ENTER key. A blinking question mark (?) appears.
Emulation
?PCL 6
Press the or key repeatedly until the message display
indicated KPDL (AUTO) appears.
Emulation
?KPDL (AUTO)
If you want to abandon the setting procedure, press the CANCEL
key.
Press the ENTER key.
Press the > key. When > Print KPDL Errs is displayed, press the
or key. The names of alternative emulations appear.
PCL 6 (default)
Line Printer
IBM Proprinter
DIABLO 630
EPSN LQ-850
1-51
Using the Operator Panel
>