Kyocera Mita Ecosys FS-1800+ Operation Manual page 38

Using the Operator Panel
ENTER
ENTER
ENTER
6
Press the or
>Private/Stored
?user name
7
Press the ENTER key. user name and the name entered for Custom
Job Name in the printer driver (job title, in this example) appear
with a question mark (?) shown blinking before that name.
>user name
?job title
8
Pressing the
If you want to abandon the selection, press the CANCEL key.
9
Press the ENTER key. If a user ID number was entered using the
printer driver, the ID entry display appears. Enter the four-digit user
ID entered in the printer driver and press the ENTER key.
>job title
ID
To enter the ID, press the < or > key to move the cursor to the
number to be changed and then enter the correct number by pressing
the or key.
10
The number of copies to be printed can be set. To increase the copy
count, press the
as many times as desired.
>job title
Copies
If you want to abandon the selection, press the CANCEL key.
11
Press the ENTER key. The message display indicates Processing,
then Ready. The specified number of copies for the job is printed.
key to display the desired user name.
or key to display the desired job title.
0000
key; to decrease the copy count, press the
001
1-26
key