Kyocera Mita Ecosys FS-1800+ Operation Manual page 70

Using the Operator Panel
>Pitch
MENU
?
ENTER
ENTER
MENU
Setting the Character Pitch for Courier/Letter Gothic
You can set the character pitch for fixed fonts when the default font is
Courier or Letter Gothic.
1
Press the MENU key.
2
Press the or
Font
Internal
3
Check that Internal is displayed and press the > key.
4
Press the or
>Pitch
10.00 cpi
5
Press the ENTER key. A blinking cursor ( _ ) appears.
>Pitch
10.00 cpi
6
Press the or
where the cursor is blinking. The character pitch can be set between
0.44 and 99.99 characters per inch, in 0.01 character-per-inch
increments. You can use the > or < keys to move the cursor right and
left.
If you want to abandon the setting procedure, press the CANCEL
key.
7
When the desired size is displayed, press the ENTER key.
8
Press the MENU key. The message display returns to Ready.
key repeatedly until Font > appears.
>
key repeatedly until >Pitch appears.
key to increase or decrease the value of the figure
1-58