Kyocera Mita Ecosys FS-1800+ Operation Manual page 61

6
?
7
ENTER
8
9
ENTER
10
MENU
Press the > key and then press the
message display indicates >Opt. StatusPage.
>Opt. StatusPage
On
The default setting is On. If it is set to Off, change it as follows.
Press the ENTER key. A blinking question mark (?) appears.
>Opt. StatusPage
? Off
Select On using the
>Opt. StatusPage
? On
Press the ENTER key again.
>Opt. StatusPage
On
Press the MENU key. The message display returns to Ready.
NETWORK STATUS PAGE
1-49
or
or key.
FS-1800+ Page Printer
Using the Operator Panel
key repeatedly until the