Kyocera Mita Ecosys FS-1800+ Operation Manual page 148

Using the Operator Panel
>>Toner ID
MENU
?
?
Setting the Toner ID
If the type of the toner kit (TK-60 [20,000 pages] or TK-60E [10,000 pages])
was changed, set the toner ID as follows so that on accurate toner gauge
measurement is indicated on the status page. The default setting is CA
(TK-60).
Also refer to the User's Manual
replacing the toner container.
1
Press the MENU key.
2
Press the or
Others
3
Press the > key.
4
Press the or
>Service
5
Press the > key.
6
Press the or
>>Toner ID
##
1-136
supplied with the toner kit when
key repeatedly until Others > appears.
>
key repeatedly until >Service > appears.
>
key repeatedly until >>Toner ID appears.