Pt-4/Pt-60 Face-Up Output Tray - Kyocera Mita Ecosys FS-1800+ Operation Manual

D.2.5 PT-4/PT-60 Face-up Output Tray
Use the face-up output tray when you wish paper to be stacked with the
printed side facing up (reverse order), or when you are printing on
envelopes, postcards, transparencies, or thick paper. When installing it
directly to the printer, use PT-4. If an option duplexer has been installed,
use PT-60.
1
Install the paper stopper according to the size of paper to be used.
(same for both PT-4 and PT-60)
2
Install the face-up output tray on the rear of the printer.
When installing directly to the printer
If a duplexer has been installed to the printer
D-19
Legal Size
A4 Size
Letter Size
Paper Stopper
Face-up Output Tray
(PT-4)
Face-up Output Tray
(PT-60)
Installing Option Units