Kyocera Mita Ecosys FS-1800+ Operation Manual page 59

8
?
9
ENTER
10
11
ENTER
12
MENU
Press the > key. Each time the
changes as shown below.
>>DHCP
Off
>>IP Address
000.000.000.000
>>Subnet Mask
000.000.000.000
>>Gateway
000.000.000.000
Display the item to be set and press the ENTER key.
For DHCP , a question mark (?) appears. For IP Address, Subnet
Mask, and Gateway, the cursor (
For DHCP, select On or Off using the
Subnet Mask, and Gateway addresses, press
the number (000 to 255) where the cursor is blinking. You can use
the > and < key to move the cursor right and left.
To obtain these addresses, consult your network administrator.
Press the ENTER key.
Press the MENU key. The message display returns to Ready.
1-47
Using the Operator Panel
or key is pressed, the item
) blinks.
or key. For IP Address,
or key to change