Summer Time Setting; Setting The Current Date And Time - Kyocera FS-1028MFP Setup Manual

Panel Setup
2
3
4
5
6
1
2
3
4
1
2
3
4
5
6
12
Press [OK]. The Date Setting screen appears.
Press or to select Time Zone.
Press [OK]. The Time Zone screen appears.
Press or to select the time zone that you are in.
Press [OK]. The time zone is set and the Date Setting menu reappears.

Summer Time Setting

Perform the following procedure to turn the summer (daylight saving) time setting on
and off.
NOTE:
This setting is valid only in the area where summer time is observed.
In the Date Setting menu, press
Press [OK]. The Summer Time screen appears.
Press or to select whether summer time is enabled.
Press [OK]. The summer time is set and the Date Setting menu reappears.

Setting the Current Date and Time

Perform the following procedure to set the current date and time.
NOTE:
Periodically check the time that is shown in the message display and adjust
as necessary to match the current time.
In the Date Setting menu, press
Press [OK]. The Date/Time screen (month:day:year) is appears.
To set the date, for each field press
the correct value then press
Use and to move the cursor right and left.
When the date is correct, press [OK]. The time setting screen (hour:minute:second)
is appears.
To set the time, for each field press
the correct value then press
Press [OK]. The date and time is set and the Date Setting menu reappears.
or to select Summer Time.
or to select Date/Time.
or as many times as necessary to display
to move to the next field.
or as many times as necessary to display
to move to the next field.
SETUP GUIDE