4� Adjusting The Hydraulic Gauge; 5� Bleeding Air From The System - SPX FLOW Bolting Systems PE55TWP-4-BS Operating Instructions And Parts List Manual

Set-Up Instructions Continued
5. Bleeding Air from the System
After all connections are made, the hydraulic system must be bled of any trapped air� With no load on
the system and the pump vented and positioned higher than the hydraulic device, cycle the system several
times. Check the reservoir fluid level and fill to proper level with Power Team hydraulic fluid as necessary. If
there is a problem contact the Power Team�
Form No. 1000679
9
© SPX FLOW, Inc.
Rev. 7 Nov. 6, 2023