Safety Symbols And Definitions; Safety Precautions - SPX FLOW Bolting Systems PE55TWP-4-BS Operating Instructions And Parts List Manual

Safety symbols are used to identify any action or lack of action that can cause personal injury.
Your reading and understanding of these safety symbols is very important.
: Indicates an imminently hazardous situation which, if not avoided, will result in death
or serious injury.
WARNING : Indicates a potentially hazardous situation which, if not avoided, could result in death
or serious injury.
: Indicates a potentially hazardous situation which, if not avoided, may result in minor
or moderate injury.
CAUTION: Used without the safety alert symbol indicates a potentially hazardous situation
which, if not avoided, may result in property damage.
IMPORTANT: Important is used when action or lack of action can cause equipment failure, either
immediate or over a long period of time.
These instructions are intended for end-user application needs. For a detailed parts list or to
locate a Power Team Authorized Hydraulic Service Center contact your nearest Power Team facility. A
list of all Power Team facilities is located at the end of this document.
WARNING
: To help prevent personal injury,
• The following procedures must be performed by qualified, trained personnel who are
familiar with this equipment. Operators must read and understand all safety precautions
and operating instructions included with the device. If the operator cannot read these
instructions, operating instructions and safety precautions must be read and discussed in
the operator's native language.
• These components are designed for general use in normal environments. These
components are not specifically designed for lifting and moving people, agri-food
machinery, certain types of mobile machinery or special work environments such as:
explosive, flammable, or corrosive. Only the user can decide the suitability of this
machinery in these conditions or extreme environments. Power Team will supply
information necessary to help make these decisions. Consult your nearest Power Team
facility.
General
• Safety glasses must be worn at all times by the operator and anyone within sight of the
unit. Additional personal protection equipment may include: face shield, goggles, gloves,
apron, hard hat, safety shoes, and hearing protection.
• Operation, repair, or maintenance of hydraulic equipment should be performed by a
qualified person who understands the proper function of hydraulic equipment per local
directives and standards.
• Hydraulic equipment must be assembled correctly and then checked for proper function
before use. Use hydraulic components of the same hydraulic pressure ratings. An
appropriate hydraulic pressure gauge is recommended to monitor pressure.
• Never place your hands or other body parts near a hydraulic fluid leak. Never use your
hands or other body parts to check for a possible leak. High pressure fluid can be injected
under your skin causing serious injury and/or infection.
© SPX FLOW, Inc.

SAFETY SYMBOLS AND DEFINITIONS

SAFETY PRECAUTIONS

3
Form No. 1000679
Rev. 7 Nov. 6, 2023