A Snmp Remote Configuration Chart - HP Compaq t1010 Supplementary Manual

SNMP Remote Configuration
The following chart is provided to help network administrators
make remote configuration changes to WBTs in a managed
network. These changes are made by physically writing to the
managed devices using the logical objects listed in the MIB as
reference. This chart lists:
I
The lower-most subgroup the logical object belongs to
I
The object's name
I
What can be written to the object
I
Where the UI is modified by the write
✎
For detailed information about each MIB group and its objects
see the sections SNMP and DHCP Groups, Physical Devices
Groups, and Network and Connections Groups in the network
administrator's guide.
You can use Remote Administrator 3000 or an SNMP
management tool and the following chart to remotely affect
changes to the terminals in your network.
Administrators Guide
A
Chart
A–1