HP Compaq t1010 Supplementary Manual page 242

Modifying and Deleting Terminal Accounts
Table 41–1:
Function
Up and Down
Toggle AutoStart
Connection Name
41–4
Modify User Account Dialog Box (Continued)
Description
Select a connection and click on the Up
or Down command button to move it up
or down one place in the Connection
Name list. If there are no connections
listed in Connection Name, the
command buttons are deactivated.
Click on this command button to toggle
between Yes and No. These two choices
are listed under AutoStart in
Connection Name.
List box displaying connections.
✎
Connection Name
This list shows the connections available
to a terminal account.
Type
This section of the list displays the
connection type of each connection. See
Type above.
AutoStart
This section of the list displays whether
the connection will or will not start
automatically.
✎
The first connection in the list is
used by the Single Button
Connect feature. Use the Up
and Down buttons to rearrange
the list.
Connection Name, Type and
AutoStart comprise a list box.
When the Modify User dialog
box displays, what appears in
this list box is the connection
type in the last account that you
created.
Administrators Guide