HP Compaq t1010 Supplementary Manual page 164

Managing Network Adapters
The following table discusses the functions of the Adapters
Configuration dialog box.
Table 22–1:
Function
Adapters
Check Network on
BOOT check box
Accept Terminal Name
from DHCP check box
Properties...
22–2
Adapters Configuration Dialog Box
Description
This is a list of all the available adapters
on a terminal.
Check this box (default is checked) if you
want the terminal to verify terminal
connection to the network upon boot (a
message is displayed if the test fails). If
you are using an adapter that does not
immediately connect to the network upon
boot, you may desire to un-check the box
so that the message does not appear
each time the terminal boots.
Some (but not all) DHCP servers can
assign a terminal name through DHCP
option 12. If your DHCP server has this
capability, check this box if you want your
terminal to use this assigned name
(default is Not Checked).
Click on this command button to invoke a
properties dialog box.
In the properties dialog box are the IP
Address properties sheet and the Name
Server properties sheet. The following
sections discuss these properties sheets.
Administrators Guide