HP Compaq t1010 Overview
Installing a wl110 wireless pcmcia card
Hide thumbs
Also See for Compaq t1010:
- Supplementary manual (319 pages) ,
- User manual (58 pages) ,
- Quick reference manual (27 pages)
Advertisement
Quick Links
b
Installing a WL110 Wireless
Overview
This WL110 wireless PCMCIA card is intended for installation on the
T1010 Thin Client that is running Windows CE or Windows NTe.
Item
1
2
3
4
PCMCIA Card on a
T1010 Thin Client
Description
Integrated antennas
Radio LED
I
Off—no wireless activity
I
Blinking—sensing/transmitting wireless data
Power On/Off LED
I
Solid green—standard operational mode
I
Blinking green—power management mode
Optional external antenna connector
1
Advertisement
Related Manuals for HP Compaq t1010
Summary of Contents for HP Compaq t1010
- Page 1 Installing a WL110 Wireless PCMCIA Card on a T1010 Thin Client Overview This WL110 wireless PCMCIA card is intended for installation on the T1010 Thin Client that is running Windows CE or Windows NTe. Item Description Integrated antennas Radio LED Off—no wireless activity Blinking—sensing/transmitting wireless data Power On/Off LED...
-
Page 2: Audience Assumptions
✎ Do not install the new wireless PCMCIA card on your T1010 Thin Client until you complete the software installation and configuration. Audience Assumptions Installing a WL110 wireless PCMCIA card requires the same level of expertise that you need to install a standard Ethernet network adapter card. - Page 3 Using Thin Client Manager to Download Add-on Software to Windows CE Thin Clients ✎ If the Thin Client is running Windows NTe, the WL110 wireless PCMCIA card drivers are already included with the factory-installed image. Continue with the “Preparing the Windows NTe Thin Client”...
- Page 4 Using Rapport to Download Add-on Software to Windows CE Thin Clients ✎ If the Thin Client is running Windows NTe, the WL110 wireless PCMCIA card drivers are already included with the factory-installed image. Continue with the “Preparing the Windows NTe Thin Client” section. 1.
- Page 5 13. The Software Distribution Wizard prompts you that it is ready to create the update in the Rapport database. Click Create. 14. After the Software Distribution Wizard prompts you that it is finished creating the update, click Finish. 15. The Update Manager is highlighted in the Rapport tree control and the results window is displayed.
- Page 6 7. (Optional) If you want to enable encryption: a. Select the Encryption tab and select the Enable encryption check box. b. Enter the encryption key information for Key 1, Key 2, Key 3, and Key 4. c. Select the appropriate value for the Encrypt data transmission using field.
- Page 7 Preparing the Windows NTe Thin Client 1. Power up the Thin Client and confirm that it is connected to the network. 2. Log on as Administrator. ✎ If you need to access the Specify Logon Information screen, press the following keys in the following order: Left Arrow, 3.
- Page 8 10. (Optional) If encryption will be used, select the Encryption tab. a. Select the Enable Data Security check box. b. Select the appropriate value for the Encrypt data transmission using field. The default value is “Key 1.” c. In the Encryption Key section, select the Use Hexadecimal (0–9, a–f) check box.
- Page 9 20. The Microsoft TCP/IP Properties window is displayed. From the IP Address tab, select the Obtain an IP address from a DHCP Server check box. The following message is displayed: DHCP protocol will attempt to automatically configure your workstation during system initialization. Any parameters specified in these property pages will override any values obtained by DHCP.
-
Page 10: Troubleshooting
Troubleshooting After you have installed the necessary software and you have configured your Thin Client, attempt to access the network. If you are unable to access the network, refer to the “Appendix B: Troubleshooting” section of the WL110 Wireless PC Card Quick Install Guide that came with your option kit.