Basic Properties Sheet - HP Compaq t1010 Supplementary Manual

PC Card Adapters for Wireless Networks

Basic Properties Sheet

The Basic properties sheet is the default of the dialog box and is
shown in Figure 32–1.
Figure 32–1: WaveLAN/IEEE Settings Dialog Box
The following table discusses the properties sheet.
Table 32–1:
Function
WaveLAN Network Name
Ad-Hoc Demo Mode
32–2
Basic Properties Sheet
Description
Enter in this field the name of the LAN
network that you want to connect to. This field
must match the name of the current wireless
network infrastructure. The default for this field
is blank.
Click here to enable Ad-hoc Demo Mode.
Enabling this mode will allow the terminal to
connect to a small wireless workgroup. In this
mode the terminal will:
I
Ignore WaveLAN Network Name.
I
Ignore WavePOINT-ll access points.
I
Fix the radio to operate at factory default.
By default the check box is unchecked.
Administrators Guide