HP Compaq t1010 Supplementary Manual page 201

PC Card Adapters for Wireless Networks
Table 32–2:
Function
MAC Address
AP Density
Transmit Rate
32–4
Advanced Properties Sheet
Description
Enter in this field a user assigned MAC
address. You will not have to change this
parameter for most networks. You will only have
to assign an address if your network uses local
MAC addressing. By default this field is blank.
Select in this scroll box an AP density (access
point density) value. This parameter controls
the roaming sensitivity of the terminal. The
values are:
I
Low Density
I
Medium Density
I
High Density
This parameter is set by:
I
The density of access points in the
network.
I
The configuration of the access points.
The default is Low Density.
Select in this scroll box the transmission rate of
the connection. The values are:
I
Low
I
Standard
I
Medium
I
High
The default is High.
Administrators Guide