Pc Card Adapters For Token Ring Networks; Using The Racore - Token Ring Adapter Settings; Dialog Box - HP Compaq t1010 Supplementary Manual

PC Card Adapters for Token Ring
✎
This chapter applies only to the Compaq T1010 terminal.
Your WBT supports PCMCIA RACORE token ring adapter
cards. This chapter discusses the setup for RACORE token ring
card. Figure 30–1 shows the RACORE Token Ring Adapter
Settings dialog box. Use this dialog box to configure a RACORE
token ring card.
Using the RACORE - Token Ring Adapter
Settings Dialog Box
To invoke this dialog box:
1. Press
2. Click on the Devices tab.
3. Click on the RACORE - TR icon in the icon container on the
Devices properties sheet.
Administrators Guide
to invoke the Terminal Properties dialog box.
F2
30
Networks
30–1