Single Button Connect - HP Compaq t1010 Supplementary Manual

AutoStart
AutoStart is a function that automatically connects you once you
have logged into your terminal. Autostart can be added to any
defined connection in any account. Each user can have different
and/or multiple autostart connections. To use the function:
1. Enable security.
2. Select the account you want Autostart added to and click on
the Modify User... command button.
3. Use the Modify User dialog box to add Autostart.
4. Restart or log off of your terminal.
The Terminal Login dialog box displays. Use it to log into your
terminal. The AutoStart function will then automatically connect
you to the connection that has autostart associated with it.
See "Shutting Down the Terminal" for more details about logging
into the terminal.

Single Button Connect

The Single Button Connect feature is an automatic login
function that uses a dialog box as a prompt to log you into your
terminal again after logging out. Figure 42–3 shows this dialog
box.
Single button connect is a global and automatic function, and is
not included as a terminal account parameter. This function will:
1. Log you into your terminal using the account that has
autologin associated with it.
2. Make the first connection listed in the Connection Name list
in the Modify User Account dialog box (unless another
connection in the list has been made with Autostart).
Administrators Guide
Terminal Login
42–3