HP Compaq t1010 Supplementary Manual page 263

How to...
Switch between multiple sessions:
❏
❏
Reset your terminal:
1. Press
dialog box.
2. Click on (to check) the Reset the Terminal to Factory
Default Property Settings check box.
3. Click on Yes in the System Settings Change dialog box.
The terminal is reset to factory defaults.
✎
If the above reset procedure fails, call the manufacturer's
technical support for instructions on using a hot-key reset
procedure.
Determine the size of the onboard memory:
1. Press
dialog box.
2. Read the firmware revision number listed in RAM: on the
General properties sheet.
3. Click on the Close command button on the General
properties sheet to return to Connection Manager.
45–4
Press Ctrl+Alt+↑ to proceed to the previous session.
Press Ctrl+Alt+↓ to proceed to the next session.
on your keyboard to invoke the Terminal Properties
F2
on your keyboard to invoke the Terminal Properties
F2
Administrators Guide