Creating New Connections; Using The New Connection Dialog Box - HP Compaq t1010 Supplementary Manual

The New Connection dialog box is used to create new
connections. Figure 9–1 shows the New Connection dialog box.
Figure 9–1: New Connection Dialog Box

Using the New Connection Dialog Box

To invoke the dialog box:
1. Click on the Configure tab in the Connection Manager
dialog box.
2. Click on the Add command button on the Configure
properties sheet.
See "Connection Configuration" for details about the
Connection Manager.
Use the scroll list shown in the dialog box above to select the type
of connection protocol you want. When you choose from the list
above, you are deciding which connection protocol you want to
use to connect to a server. Six selections are available.
Administrators Guide

Creating New Connections

9
9–1