Date/Time Properties - HP Compaq t1010 Supplementary Manual

27

Date/Time Properties

The Date/Time Properties dialog box (Figure 27–1) allows you to
set the date and time on the terminal.
1. Press to open the Terminal Properties dialog box.
F2
2. Click on the Devices tab.
3. Double-click on the Date/Time-on icon in the icon container
on the Devices properties sheet.
Figure 27–1: Date/Time Properties Dialog Box
Use the calendar to set the date. Select the Time Zone and check
the check box if daylight savings time is currently in effect.
Administrators Guide 27–1