Isdn Settings - HP Compaq t1010 Supplementary Manual

PC Card Adapters for Modems
Table 25–1 discusses the functions of this dialog box.
Table 25–1:
Function
Modem Name
Init Commands
Flow Settings
✎
The Hayes command set is discussed in greater detail in "Modem
AT Commands."

ISDN Settings

Use the ISDN Settings dialog box to set the terminal's ISDN
(Integrated Services Digital Network) settings. If you do not
know this information, ask your system administrator.
Figure 25–1 shows the dialog box. To invoke the dialog box, click
on the ISDN Settings... command button on the Devices
properties sheet.
25–2
Add or Change Modem Dialog Box
Description
This field displays the brand name of the
modem in your system.
Enter a modem initialization command
string in this field. The default is
ATE0V1&C1&D1<cr>.
Use this group box to set the following
flow settings:
Flow Hardware
Enter a flow hardware command string in
this field. The default is AT&K3<cr>.
Flow Software
Enter a flow software command string in
this field. The default is AT&K4<cr>.
Flow Off
Enter a flow hardware command string in
this field. The default is AT&K0<cr>.
Administrators Guide