Converting Your Rack-Mount System To A Desktop System - HP b2600 Supplementary Manual

Parts removal and replacement guide

Hide thumbs Also See for b2600:

Table of Contents

Remove/Replace System Components

Converting Your System for Desktop or Rack-Mount Use

Converting Your Rack-Mount System to a Desktop System

To convert your rack-mount system to a desktop system, you will need to order the desktop

kit (HP Part Number A7227A) from you local HP Sales Representative. Next, follow this

procedure:

1. Unplug the workstation and reverse the procedure in the section "Converting Your

Desktop System to a Rack-Mount System" in this chapter. You will need to complete

steps 4 through 1 (respectively). Note that step 4 requires the use of the rack-mount

instructions that came with your desktop kit.

2. Complete step 5 in the section "Converting Your Desktop System to a Rack-Mount

System" in this chapter, but at the Conﬁguration Menu prompt in step C, type:

Configuration Menu: Enter command > FanChoice DeskSide

Chapter 1

Table of Contents