HP b2600 Supplementary Manual page 21

4. Press in on the retainer clips on both sides of the CD drive bay and pull toward you. See
Figure 1-10.
Figure 1-10. Removing the CD Drive Bay and CD Drive
CD Drive
Bay
CD Drive
Retainer Clip
5. Take the back cover off the CD drive bay by lifting up on the raised portion of the back
cover. This will cause the retainer snaps to be remove from their slots on the CD drive
bay. See Figure 1-11. Also, note the manner in which the audio, power and control
cables were neatly fed through the raised opening in the CD drive bay's back cover.
Figure 1-11. Removing the CD Drive Bay's Back Cover
Retainer
Lift Here to
Snap
Remove the
Back Cover
Chapter 1
Removing/Replacing System Components
Retainer
CD Drive
Snap
Bay
Remove/Replace System Components
CD Drive
Retainer Clip
CD Drive
CD Drive Bay's Back Cover
21