HP b2600 Supplementary Manual page 102

Remove/Replace Flexible Disk Drives
Removing the Flexible Disk Drive
Lift up on the PCI cage handle and remove the PCI cage from the workstation, but first make
2.
sure the flexible disk drive has been removed. Notice how the SCSI cable has been routed
over the exposed edge of the I/O cards. See
Figure D-8 Removing the PCI Cage
PCI Cage Handle
3. Rotate the PCI cage over so you can see the card(s) inside the PCI cage and observe the SCSI
cable and how it is folded. See
SCSI card and note the connection used. See
Disconnection the SCSI Cable
Figure D-9
Folded SCSI Cable
102
Figure D-8.
PCI Cage
. Next, disconnect the SCSI cables connector from the
Figure D-9
Figure D-9
SCSI Card
SCSI Cable
PCI Cage Cover
I/O Cards
.
SCSI Cable Connector
Appendix D