HP b2600 Supplementary Manual page 100

Remove/Replace Flexible Disk Drives
Removing the Flexible Disk Drive
6. Slide the flexible disk drive out of the flexible disk drive bay and disconnect the flexible disk
drive power and SCSI cables. See
replace the SCSI cable, you will need to line up the red line on the SCSI cable with the right side
of the flexible disk drive's SCSI connector, as viewed in
Figure D-5 Disconnecting the Flexible Disk Drive's Cables
SCSI Cable
Flexible Disk
Drive
7. Unscrew the flexible disk drive's bezel mounting screws and remove the bezel by rotating it
outward from the flexible disk drive's bracket. See
Figure D-6 Unscrewing the Flexible Disk Drive's Bezel Mounting Screws
Bezel
Mounting Screw
100
Figure D-5
Mounting Screw
Flexible Disk Drive's
Bottom Side
. Note that these cables are not keyed, so when you
Figure D-5.
Figure D-6.
Flexible Disk Drive's
Bracket
Flexible Disk
Drive Bay
Red Line
Power Cable
Pin 1 of the
Connector
Bezel
Appendix D