HP b2600 Supplementary Manual page 87

4. Unscrew the four mounting screws that hold the DAT drive in the DAT drive bay. See
Figure C-3 Removing the DAT Drive Bay and DAT Drive
DAT Drive Bay
DAT Drive
Mounting
Screws
5. Remove the DAT drive bay's back cover. Note that this back cover snaps off of the DAT drive bay.
See .
Figure C-4
Figure C-4 Removing the DAT Drive Bay's Back Cover
DAT Drive
Bay
Appendix C
Mounting Screws
Remove/Replace DAT Drives
Removing the DAT Drive
SCSI Cable
DAT Drive
Bay's Back
Cover
SCSI Terminator
Figure C-3
87