HP b2600 Supplementary Manual page 88

Remove/Replace DAT Drives
Removing the DAT Drive
6. Slide the DAT drive out of the DAT drive bay and disconnect the DAT drive power and SCSI
cables. See
Figure C-5
Figure C-5 Disconnecting the DAT Drive's Cables
Power Cable
DAT Drive
7. Unscrew the four bracket mounting screws from the DAT drive and remove the DAT drive's two
brackets. See
Figure C-6
Figure C-6 Unscrew the Four DAT Drive Bracket Mounting Screws
Bracket Mounting Screws
88
. Note that these cables are keyed for easy replacement.
.
Bracket Mounting Screws
DAT Drive
Bracket DAT Drive
DAT Drive Bay
SCSI Cable
SCSI Terminator
DAT Drive
Bracket
Appendix C