For more information about using the modem or about using
AT commands and dial modifiers, refer on this CD to the
Modem and Networking guide or the Modem Commands guide.
Connecting a Network Cable
An optional network cable has an standard 8-pin RJ-45 connector
at each end and may contain noise suppression circuitry, which
prevents interference with TV and radio reception.
1. Orient the end of a network cable with noise suppression
circuitry 1 toward the RJ-45 jack on the computer.
2. Plug the network cable into the RJ-45 jack 2 .
3. Plug the other end of the cable into a network jack 3 .
4. Turn on or restart the computer.
5. Connect to the network.
Connecting a network cable
For more information about using a network, refer to the
Modem and Networking guide on this CD.
Hardware Guide
External Device Connections
7–3