Troubleshooting - Eighteeth Fast-Pack pro User Manual

10.Troubleshooting

When trouble is found, check the following points before contacting your distributor. If
none of these are applicable or the trouble is not remedied even after action has been
taken, the product may have failed. Contact your distributor.
Problem
The power is
not turned
on.
The power
LED on
charge base
does not
light.
No charge
indicator
flash on
handpiece
screen
Handpiece
screen does
not appear
No sound.
Cause
The battery is flat.
Press the power switch
too short time.
Using a wrong adapter.
The adapter is
connected.
The plug of the adapter
is not inserted into the
outlet.
There is no electricity in
the outlet.
Put the handpiece into
the charge base in the
wrong direction.
Charge pin of charge
base is unable
rebound.
Contactors are dirty.
The charge base is
broken.
The handpiece
broken.
Beep volume set to 0.
Solution
Charge the battery.
Long press the power
switch.
Use the original adapter.
not
Check the connection.
Check the connection.
Check the connection.
Check the direction.
Remove debris which is
to between moving part and
base of the charge pin.
Cleaning the surface of
contactors.
Connect
handpiece directly, and
contact your distributor.
Check if there is a sound
is
of beep, and contact your
distributor.
Set beep volume to 1 or 2.
26 / 36
adapter to
Ref.
chap
7.1
5
4.3
4.3
/
/
4.3
/
/
/
/
6.2