Installing The Fast-Pack Pro; Installation Of Heating Needle - Eighteeth Fast-Pack pro User Manual

4.Installing the Fast-Pack pro

4.1Installation
needle
Make sure the hexagon plum
blossom groove on heating needle
is aligned with the hexagon plum
blossom boss on handpiece, push
till to position.
Holding the grey shell to pull the
heating needle out from the
handpiece.
The heating needle can be installed
in any one of 6 orientations. Pull it
out from handpiece then can be
installed in other orientations.
of heating
11 / 36

Do not use corroded and fractured
heating needle.

Do not polish heating needle

After the operation is completed,
wait for the heating needle to cool
down and remove it to prevent the
heating needle
damaged accidentally.

The cooling process will take about
2-3 seconds and the real-time
temperature will show on the
screen.

Even if the heating needle cools
down already,
recommend not to touch the tip part
on heating needle, there is a risk of
heat injury or damaging the heating
needle. Hold the grey shell to
remove.
from being
we strongly