Output Tray - Ricoh DSc332 Operating Instructions Manual

Output Tray

Specify the output tray.
outbin=value of output tray
Limitation
❒ Only installed output trays are available.
Note
❒ The output tray value corresponds to the ID number of the output tray ob-
tained from the printer information (for example: "info" command in ftp, "in-
fo" command in telnet. For more information about telnet, see Network
Guide.).
❒ You can select an output tray using alphabetical letters instead of the output
tray's ID number. For more printer information, see Printer Reference 2.
Output tray
Internal tray 1
External tray
Left tray 1
Left tray 2
Finisher upper tray
Finisher shift tray
Finisher booklet tray
The following sample shows how to print from internal tray 1 (host name:
"nphost"; file name: "file1"):
• rsh
% rsh nphost print outbin=upper < file1
• rcp
% rcp file1 nphost:outbin=upper
• ftp
ftp> put file1 outbin=upper
Specifying the Device Option
Value
upper
lower
lower2
lower3
finisherproof
finishershift
finisherbooklet
1
25