Ricoh DSc332 Operating Instructions Manual page 1068

General settings guide
Hide thumbs Also See for DSc332:
Table of Contents

Advertisement

Appendix
NetBEUI Computer Name =<computer name> The NetBEUI Computer Name is defined as
nmsd start. (NetBEUI)
nprinter start. (NetWare)
nwstart start. (NetWare)
Open log file <file name>
papd start. (Apple Talk)
permission denied.
phy release file open failed.
Print queue <print queue name> cannot be
serviced by printer 0, <print server name>
Print server <print server name> has no print-
er.
Print sessions full
Printer <printer name> has no queue.
9
pserver start. (NetWare)
Required computer name (<Computer name>)
is duplicated name.
Required file server (<file server name>) not
found.
restarted.
sap enable, saptype=<SAP type>, sapname=
<SAP name>
134
Message
Causes and solutions
<computer name>.
nmsd (Name Server Daemon) has started.
(In remote printer mode) NetWare service has
started.
The service for NetWare protocol stack setting
has started.
(In print server mode) The specified log file
has been opened.
Apple Talk print service has started.
Job cancellation was determined to be unau-
thorized after checking the user name and
host address (except for ROOT authorization).
A replacement network interface board is re-
quired. Contact your sales or service repre-
sentatives.
(In print server mode) The print queue name
cannot be serviced. Make sure that print
queue volume is on the specified file server.
(In print server mode) The printer is not as-
signed to the print server <print server
name>. Using NWadmin, assign the printer,
and then restart the printer device.
Cannot accept the print session.
(In print server mode) The print queue is not
assigned to the printer. Using NWadmin, as-
sign the print queue to the printer, and then
restart it.
(In print server mode) NetWare service has
started.
The same computer name is detected on the
network. The start job determines the compu-
ter name by adding it to the suffix (0,1....).
Configure a new computer name that is
unique.
Cannot find the required file server.
LPD has started.
The SAP function has started. The SAP (SAP
type and SAP name) packet is issued to adver-
tise the service on the NetWare server SAP ta-
ble.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dsc338Aficio 2232cAficio 2238c

Table of Contents