Ricoh DSc332 Operating Instructions Manual page 1067

General settings guide
Hide thumbs Also See for DSc332:
Table of Contents

Advertisement

Message
IEEE 802.11b TX Rate <Transfer Speed>
inetd start.
<interface> started with IP: <IP address>
<Interface>: Subnet overlap.
IPP cancel-job: permission denied.
ipp disable.
ipp enable.
IPP job canceled. jobid=%d.
job canceled. jobid=%d.
LeaseTime=<lease time>(sec), RenewTime=
<renew time>(sec).
Login to fileserver <file server name>
(<IPX|IP>,<NDS|BINDERY>)
multid start.
Name registration failed. name=<NetBIOS
name>
Name registration success in Broadcast name=
<NetBIOS name>
Name registration success. WINS Server=
<WINS Server Address> NetBIOS Name=
<NetBIOS name>
nbstart start.(NetBEUI)
nbtd start.
Causes and solutions
The IEEE 802.11b transmitting speed (set
speed) is displayed.
(Example: current Tx Rate is 11 Mbps.)
IEEE 802.11b Tx Rate 11 Mbps
Transmission speeds vary depending on sig-
nal quality. Displayed values may differ from
actual transmission speed.
An inetd has started.
<IP address> has been set for <Interface> and
<Interface> started.
Subnet from Netmask and the IP address you
tried to set for <Interface> overlap the subnet
of another interface.
Set Subnet so it does not overlap with another
interface.
The printer could not authenticate the name of
the user attempting to cancel a job.
Printing with ipp is disabled.
Printing with ipp is enabled.
The spooled job has been canceled due to er-
ror or user request.
The spooled job has been canceled due to er-
ror or user request.
The resource lease time received from the
DHCP server is <lease time> in seconds. The
renewal time is also <renew time> in seconds.
(In print server mode) Logged on to the file
server with NDS or BINDERY mode.
Data transmission service for multiprotocols
has started.
The printer could not register the name of
NetBIOS.
The NetBIOS name was successfully regis-
tered from a broadcast.
The NetBIOS name was successfully regis-
tered to the WINS server.
The server for setting the NetBEUI protocol
stack has started.
nbtd (NetBIOS over TCP/IP Daemon) has
started. (Available only in DHCP mode)
Message List
9
133

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dsc338Aficio 2232cAficio 2238c

Table of Contents