Machine Status And Configuration - Ricoh DSc332 Operating Instructions Manual

Machine Status and Configuration

You can check the machine status and configuration using telnet or UNIX.
❖ ❖ ❖ ❖ telnet
Use the "info" or "status" command.
❖ ❖ ❖ ❖ UNIX
Use the "lpr" or "lpstat" command, or "stat", "info" parameter of rsh, rcp, or ftp.
Machine status
Status
Call Service Center
Card/Counter not inserted
Coin/Key Counter not inserted
Coin or amount not inserted
Cover Open: Finisher
Cover Open: Finisher Front lower
Cover Open: Finisher Upper
Energy Saver Mode
Error: Ethernet Board
Error: HDD Board
Error: IEEE1394 Board
Error: Memory Switch
Error: Parallel I/F Board
Error: USB I/F
Error: Wireless Card
Error: Wireless Card or Board
Full: Finisher
Full: Finisher Booklet Tray
Full: Hole Punch Receptacle
Full: Waste Oil Bottle
In Use: Finisher
In Use: Input Tray
In Use: Staple Unit
Understanding Displayed Information
Description
Call service center and ask for assistance.
The machine is waiting for prepaid card or key
counter to be inserted.
The machine is waiting for coin or key counter
to be inserted.
The machine is waiting for coin to be inserted.
Finisher cover is open.
Finisher lower-front cover is open
Finisher top cover is open.
The machine is standing by in Energy Saver
mode.
An Ethernet board error has occurred.
A hard disk drive board error has occurred.
An IEEE 1394 interface board error has oc-
curred.
Memory switch data is corrupt.
A parallel interface board error has occurred.
A USB 2.0 interface board error has occurred.
Wireless card is not inserted.
A wireless card or IEEE 802.11b interface unit
error has occurred.
Finisher tray is full.
Booklet finisher tray is full.
Chad receptacle for hole punch is full.
Waste oil bottle is full.
Finishing is in progress.
Paper tray is in use.
Stapling is in progress.
9
121