Ricoh DSc332 Operating Instructions Manual page 1039

SMB
Use the "smb" command to configure
or delete the NetBEUI settings such as
the computer name or workgroup
name.
msh> smb parameter
Parameter Settings
comp Your computer name consist-
ing of up to 15 characters
group Workgroup name consisting
of up to 15 characters
comment Comment consisting of up to
31 characters
notif {on | To notify print job comple-
off} tion, specify "on". Otherwise,
specify "off"
clear comp Clears the computer name
clear group Clears the Workgroup name
clear com- Clears comment
ment
Note
❒ You cannot use a computer name
starting with "RNP" or "rnp".
web
Use the "web" command to display
and configure the parameters on the
Web browser.
❖ ❖ ❖ ❖ View Settings
msh> web
❖ ❖ ❖ ❖ URL Configuration
The link address reached by press-
ing [URL] on the Web browser can
be set.
web url The URL or IP ad-
dress you want to register.
Example:
(Xs represent the IP address.)
msh> web url http://
XXX.XXX.XXX.XXX/
Remote Maintenance by telnet
❖ ❖ ❖ ❖ Link Name Configuration
You can enter the name for [URL]
that appears on the Web browser.
msh> web name Name you
want to display
Example:
(Xs represent the name you want
to display.)
msh> web name XXX
❖ ❖ ❖ ❖ Help URL Configuration
The link address reached by press-
ing [Help] or "?" on the Web brows-
er can be set.
msh> web help Help URL or
IP address
Example:
(Xs represent the IP address.)
msh> web url http://
XXX.XXX.XXX.XXX/help/
ROUTE
Use the "route" command to control
the routing table.
This command allows you to config-
ure and display routing information.
You can change the network configu-
ration from remote computers using
this command.
Note
❒ The maximum number of routing
tables is 16.
Commands Topics of setting
route add Adds a host/network route
{host | net} to "destination", and a gate-
destination way address to "gateway" in
*1
gateway the table. Host becomes the
*1
default.
route de- Deletes a host/network route
lete {host | from the table. Host becomes
net} desti- the default.
*1
nation
9
105